Parrot CK 3100

Hi all, Had a search on this forum but couldn't see the answer to my question, which is: What 'Autoleads' adapter do I need to fit the Parrot Ck3100 in my High Performance sound system with RTI and amp but without sub and no Dolby. I had the kit fitted in a V50 which did not have RTI but had High Perf. sound system. For this I used SOT-045 adapter lead and all worked very well. I have tried looking on-line but have seen a couple of different recommendations. Has anyone here fitting this kit themselves and if so what lead did you use? Thanks for any replies. Aeron

Yes, thanks for that. I already have a SOT-045 just want to know that it is actually the correct lead adapter. Mine has been extended to run from the rear of my previous V50 to the front and is a lot of lead to stow away presumably somewhere in the centre colsol. I suppose I could cut the lead and make it shorter but it is a shame to do that as it is nice and long to run the length of the car for those that have amp in the rear. I need to consider what to do once I can confirm that this is the correct lead.

Update - all installed 

For those that are interested, I just completed installing my Parrot CK3100 in my T6. All went quite easy apart from a faulty connector on the Parrot that took me a while to discover. The adapter lead that works with mine is the Autoleads SOT-045, so anyone considering doing this themselves it is quite easy and took me around 2 hrs - but 1 hr of that was finding and rectifying the faulty connector on the back of the Parrot display.

Hi. I'm planning on sticking a CK3100 in my XC90 and was wondering if there was an installation guide you found and followed? Many thanks. Simon